| Parameter | Specification |
|---|---|
| Substrate | Optical grade polystyrene (PS) light diffuser |
| Thickness Range | 1.5 mm / 2.0 mm / 2.5 mm / 3.0 mm |
| Diameter Range | 100 mm to 1200 mm round, square or custom profile |
| Light Transmittance | ≥ 90% with homogeneous haze diffusion |
| Dimensional Tolerance | Thickness ±0.15 mm; diameter ±0.5 mm |
| Surface Finish | Fine matte diffusion surface, both sides masked with PE film |
| Flame Rating | B2 (flame-retardant grade available on request) |
| Certifications | RoHS, REACH |
| Fabrication | CNC cutting, laser cutting, die-cutting, edge polishing, printing on request |
| Logistics Item | Standard |
|---|---|
| Standard Export Packing | Multi-piece corrugated carton + EPE foam interlayer + corner protectors |
| Palletised Loading | Fumigation-free plywood pallet, stretch-wrapped, 1.1m max stack height |
| Container Load | 20GP / 40HQ full-container and LCL consolidation available |
| Minimum Order Quantity | 100 pcs |
| Production Lead Time | 15-20 days after deposit and artwork confirmation |
| Monthly Supply Capacity | 5,000+ pcs / month, expandable to 8,000 pcs for seasonal peaks |
| Port of Loading | Shenzhen (Yantian / Shekou), China |
| Payment Terms | T/T 30% deposit + 70% before shipment; L/C at sight for orders above USD 30,000 |
Dongguan Toptrend New Materials Co., Ltd. operates a 7,000㎡ manufacturing base in Dongguan, Guangdong, running in-house vacuum metallizing chambers, precision extrusion lines, CNC routing centres and die-cutting workshops under one roof. Because you buy straight from the production floor, there is no trading-company mark-up and no third-party quality gap.
Q1: How do you prove the sheets are impact resistant and will not shatter in transit?
A: We run a 1.2 m drop test and a steel-ball impact test on every production batch and can supply the test report, together with a retained sample from your own order, before shipment.
Q2: What cutting tolerance can you hold on large bulk orders?
A: Standard tolerance is +/-0.1 mm on thickness and +/-0.5 mm on CNC cut dimensions; for high-volume repeat orders we lock the tolerance into the drawing and measure with a CMM gauge at final inspection.
Q3: Is the protective film easy to remove after long sea shipment?
A: Yes. We use a controlled-tack PE masking film that releases cleanly after 6 months of normal storage; peel it slowly at room temperature and no residue remains on the reflective surface.
Q4: Can you supply free or low-cost samples for export buyers?
A: A4-size or 200x300 mm samples are free of charge; the buyer only covers the courier freight, which is fully credited back against the first bulk order.
Q5: Do you support drawing-based mould opening and private label packing?
A: Yes. Send us a PDF/DWG drawing or a physical sample and our engineering team will open the die, confirm a golden sample, then run mass production with your own logo and retail carton artwork.
Contact Us at Any Time